SACON

Overview in the network jungle with SACON

With the products from SACON you can keep track of the network jungle. These include the S/FTP patch cables with light identification, the injectors for feeding energy into the patch cables and the marker clips. But also the fiber optic LED patch cords and the DualBoot PushPull IP20 patch cords with PushPull locking instead of the usual jack unlocking.

saCON S/FTP patch cable with light identification

The saCon patch cable has been specially developed for use in offices, industry and data centers. The particularly robust cable structure ensures that the electrical transmission parameters can only be influenced by extreme mechanical loads. The combination shield used (PiMf + braid with > 65 % coverage) together with the 360° shielded RJ45 plugs offer a high level of data security.

The patented process for the simple assignment of the plugs to each other increases the operational safety considerably, unintentional pulling of the patch cables is almost impossible. After any patch cable side has been contacted with the injector, the integrated light-emitting diodes in the RJ45 plugs light up. An ongoing data transmission is not influenced by the light identification!

The patch cables are available in the qualities Cat.6 and Cat.6A up to 500MHz.

saCon S/FTP patch cable Cat.6, LSOH

Show all (86)

saCon S/FTP patch cable Cat.6A, LSOH

Show all (112)

saCon injector for feeding energy into the saCon patch cable

The injector is simply contacted in the contact pair provided on the back of the RJ45 connector. By repeatedly pressing the button on the injector, you can choose between three operating modes (light on, slow and fast flashing). This means that there is an individual setting option for different lighting conditions. The injector is operated with four standard button cells LR736 (21.15.2208) or with a rechargeable battery (21.15.2298).

saCon Injector / LED Detector Pro

Show all (4)

saCon marking clips

The RJ45 plugs can be marked with a color clip for service assignment.

saCon marking clips

Show all (20)

saCon fiber optic LED patch cable

The saCon LWL-LED patch cable was developed for use in offices, industry and data centers.

The cable structure ensures that the optical transmission parameters offer the highest level of data security. The patented process for the simple assignment of the cable ends to one another increases the operational safety considerably, as it prevents unintentional pulling of the patch cables. After one side of the patch cable has made contact with the detector, both cable ends are electrically excited and light up.

saCon fiber optic LED patch cable duplex 9/125µm OS2

Show all (10)

saCon FO LED patch cord duplex 50/125µm OM3

Show all (30)

saCon FO LED patch cord duplex 50/125µm OM4

Show all (30)

saCon DualBoot PushPull IP20 patch cable, Cat.6 and Cat.6A, LSOH

With this RJ45 connector variant, the small RJ45 jack is no longer pressed to unlock, but simply pulled on the grommet. The PushPull locking works with every standard RJ45 socket and socket. The PushPull patch cables make it easier, for example, to patch in tightly packed data center distributors, for consolidation points that are difficult to access or for subscriber connections in the floor box.

  • PushPull connection cable RJ45/RJ45, Cat.6 or Cat.6A, shielded, 1:1 assignment with DualBoot® encapsulation including PushPull unlocking
  • The cable used offers a high level of data security thanks to its foil shield and the 360° shielded RJ45 plugs
  • Connectors are optimized for use in high density environments
  • The DualBoot® encapsulation achieved optimal strain relief and at the same time prevented the locking lever from getting stuck

saCon DualBoot PushPull IP20 patch cable, Cat.6, LSOH

Show all (8)

saCon DualBoot PushPull IP20 patch cable, Cat.6A, LSOH

Show all (8)